[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: homemade transformer
- To: tesla@xxxxxxxxxx
- Subject: Re: homemade transformer
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 02 Feb 2005 18:45:32 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Wed, 2 Feb 2005 19:06:58 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <2IvGhB.A.kQG.BdYACB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Ed Phillips <evp@xxxxxxxxxxx>
"Size of the wire (determined by the current.. what is it 750 cmil/amp?
as a
guideline)
Number of turns (determined by the maximum flux in the core)"
I just pulled an ad by an PCB outfit named "ADVANCED CIRCUITS" out of a
throw-away magazine which Has three figures showing required conductor
"cross section in SQ. MILES" vs "current in amperes". I've heard of
conservative design but this is a record!
Ed