Re: Capacitor Help (spark gap)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "MalcolmTesla" <tesla@xxxxxxxxxxxxx>

----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, December 21, 2005 1:01 AM


> Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
>
> Hi Malcolm,
>
> Actually, rotary spark gaps can get you to the "next level".  I would
> first experiment with static spark gaps for learning
> purposes.  Computer simulations show that you can get about 0.5 x the
> KVA rating of the transformer using static spark gaps in terms of
> real power to the coil. With a synchronous spark gap, you can get
> more than the KVA rating out of the transformer.  This is a fun
> persuit after you master static gaps.
>
> Gerry R.

I agree.  It seems the rotary spark gap would add more complication and I
won't be jumping onto that just yet.  My new copper tube spark gap works
much better and as an added bonus is sooooo much quieter than the two bolt
method.  The two bolts sounded like an arc welded on steroids.  The copper
tubes are pleasantly much quieter.  I think I'm going to build another
copper tube setup but this time go down to credit card thickness or even
just some thick paper instead of pennies.  This way I can split my gap
across even more surface area.

Thanks
Malcolm