[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: The Right Capacitor Match
- To: tesla@xxxxxxxxxx
- Subject: Re: The Right Capacitor Match
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 02 Aug 2005 22:38:14 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 2 Aug 2005 22:39:11 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <BitupD.A.KJB.tpE8CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "James Zimmerschied" <zimtesla@xxxxxxx>
"Ethersmith" writes:
"I have a 15K/30mA NST which I am building an MMC for.
Given LTR of 1.5* I have come up with a match in the range of .008mF"
I am using 0.011 microF for my 12K/30mA NST coil which works well. I
have tried values from 0.006 microF to 0.018 microF. My current caps
are 6 paralleled ceramic caps.
I have also used a 0.009 microF MMC on this coil with the
Cornell-Dublier caps from GEEK Group. Also worked fine.
Jim