[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Winding
- To: tesla@xxxxxxxxxx
- Subject: Re: Winding
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 10 Apr 2005 10:37:17 -0600
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 10 Apr 2005 10:53:01 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <za5gGB.A.ynB.hnVWCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Jim Lux" <jimlux@xxxxxxxxxxxxx>
How big?
Up to around 2 feet long, you can wind it in an evening by hand without too
much trouble.
Getting bigger, it's worth figuring out how to motorize things.
I did one on a lathe (it was a horrible experience... too much inertia)
I did another with someone else pushing the trigger on the electric drill.
(worked well, but had to coordinate)
I did another with a foot switch (on-off) on a drill and a jury rigged set
of clamps (worked fairly well...)
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Saturday, April 09, 2005 7:10 PM
Subject: Winding
> Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>
>
> What is the best way to wind a TC secondary? By hand?
>
Steven
> Steele
>
>