[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Resonance
- To: tesla@xxxxxxxxxx
- Subject: Re: Resonance
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 09 Apr 2005 12:40:00 -0600
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sat, 9 Apr 2005 12:44:18 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <HsfSR.A.1AF.iHCWCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>
Yes, That would be the Right Hand Rule.
I was simply following my teacher's instructions when I wound more than one
layer. The whole time, I was doubting that it was a good idea, but I didn't
say anything because he's my teacher. Next time, I'll speak my mind.
Thanks.
Steven Steele
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, April 08, 2005 10:42 AM
Subject: Re: Resonance
Original poster: Dgboorse@xxxxxxx
Steve,
I'm familiar with the empirical approach to science and use it myself from
time to time. My question is one however that I think can be easily
answered by
anyone who understands electrical theory. I'm a pre-beginner when it comes
to this stuff.
When I was your age or a bit younger, I read a book on electricity and
remember seeing a hand (a right hand) made into a fist with the thumb pointing
straight out. If I remember correctly, the thumb showed the direction of
current
flow and the curvature of the fingers showed the direction of induction...I
think...it's been more than half a century since I read it.
It came to mind when a couple men asked you if you had more than one layer or
if you wound the layers in the same direction. That's why I asked the first
question about the current flowing two different directions around the coil.
I think that Malcolm not only answered the question for me, but his
suggestion to you about reading a book on electrical theory is one I
certainly need to
do also.
Good luck in your project and your career.
Dave