[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
About MOTs..
- To: tesla@xxxxxxxxxx
- Subject: About MOTs..
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 07 Apr 2005 17:29:44 -0600
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 7 Apr 2005 17:34:42 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <bgjs0B.A.K-H.vLcVCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Mercurus2000" <mercurus2000@xxxxxxx>
This question has probably been asked before, I want to connect the high
voltage output of a small like 600 watt MOT I have to the 120 side of a
really large MOT like 1000w to get about 20-30KV out, I'll vacuum pot the
MOTs in oil and cut the center ground on the large MOT to prevent arcing,
does anyone see a problem with this? Will I have to use some sort of
current limiting even tho I'm using a little 600 watt MOT for the primary
transformer?
Adam