[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- To: tesla@xxxxxxxxxx
- Subject: Re: Resonance
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 07 Apr 2005 17:23:05 -0600
- Delivered-to: firstname.lastname@example.org
- Delivered-to: email@example.com
- Old-return-path: <firstname.lastname@example.org>
- Resent-date: Thu, 7 Apr 2005 17:27:21 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <67MjrC.A.kRH.SHcVCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>
Actually no, wire isn't cheap. at least not for me. Time isn't cheap
either. I'm getting a grade on this Tesla coil. If i finish, it's an A. If
I don't, it's a 0. I've o nly got till the end of the semester. 8^0
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
Sent: Thursday, April 07, 2005 10:47 AM
Subject: Re: Resonance
Original poster: Steve Ward <steve.ward@xxxxxxxxx>
On Apr 6, 2005 10:58 PM, Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>
> Not yet, I, still waiting on the caps.
> Why, is this a bad thing? (8^0)
> Now I'm worried.
> Should I be?
> Steven Steele
Tesla secondary windings are always (with a very few exeptions) a
SINGLE layer of coil over a form. Your winding starts at one end, and
ends once it reaches the other end. You dont go back and wind back
over the first layer of wire.
If you did wind your coil in several layers, you will simply have to
unwind these and make a single neat layer.
Dont get too bummed out, wire is pretty cheap ;-).