Re: 16 kV 250 mA TC transformers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Kreso Bukvic" <kreso.bukvic-at-kc.htnet.hr> 

Thats to pricey! I just contacted one company that makes HV trannies here .
They can make a NST like that for about 350 $ opened or they can pot it in
epoxy.

Best Regards

KReso Bukvic
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, September 24, 2004 5:51 PM
Subject: 16 kV 250 mA TC transformers


 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 >
 > I finally received all the quotes from my vendors for core and coils.
 >
 > Core cost exceeds $450 each and coil sets approx $310.00.
 >
 > Selling price will be $775.00 for each xmfr.  That is a bit steep but when
 > you consider not using a $400 external current reactor it is
 > reasonable.  The cores are laser cut for accuracy.  They are specifically
 > designed for oil immersion, and should hold up well as extra mylar is
 > extended out of each coil so the CT connection can be connected together
if
 > desired for single ended operation.  I expect to operate our units in the
 > standard
 > CT grounded configuration.
 >
 > Core dimensions are 8.75 x 12 inch and coils stick up approx 3.5 inches.
I
 > will determine the exact enclosure size necessary after I can assemble and
 > test a unit.  I expect to have the coils in 2 weeks and cores in 3 weeks,
 > so near end of Oct. is best guess.
 >
 > Dr. Resonance
 >
 > Resonance Research Corporation
 > E11870 Shadylane Rd.
 > Baraboo   WI   53913
 >
 >
 >
 >