[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bondable Magnet Wire

To: tesla-at-pupman-dot-com
Subject: Bondable Magnet Wire
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 23 Oct 2004 07:14:04 -0600
Resent-Date: Sat, 23 Oct 2004 07:14:33 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <qtpyhC.A.JSF.ukleBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Ken Purcell" <kpurcell-at-augustmail-dot-com> 

Has anyone on this list tried Bondable Magnet Wire for their secondary
coils?   It comes in two forms: solvent and heat bonded.  The suggested
methods of fixing the coil are: 1) use a solvent on a wick while winding
or 2) hot air gun. Or the other option is to bake or spray once the wind
is done.

Anyone with experience with this stuff?

Regards,

Ken

Prev by Date: Re: shaft fasteners for RSG?
Next by Date: Re: Rolled cap hell
Prev by thread: Re: Rolled cap hell
Next by thread: Cu Spheres Arrive
Index(es):
- Date
- Thread