[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Toroid suppliers
Original poster: "Dave Leddon" <leddon1-at-llnl.gov>
And if you're on the West coast, try Ross Engineering
www.rossengineeringcorp-dot-com which sells toroids up to 42 inches, not
cheaply however.
Dave
Pleasanton, CA
At 06:41 PM 10/14/2004, you wrote:
>Original poster: JBarrett-at-trumbullcorp-dot-com
>
>
>
>
>Hey Chris,
>I asked the same question sometime back and another coiler suggested wrote
>the following.
>
>
>
> Consider getting a toroid from OW Landergren in Pittsfield mass. You
> won't be disappointed.
>
>
>
>Hope this helps
>Jim Barrett
***************************************************************************
David H. Leddon
Lawrence Livermore National Lab
7000 East Ave. L-495
Livermore, CA 94550-9516
leddon1-at-llnl.gov
(925) 422-1532 (VOICE)
(925) 423-8223 (FAX)
***************************************************************************