Re: current output of 15 Kv, 30 mA neon xformer HALVED?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jack Vandam" <snotoir7674g-at-mindspring-dot-com> 

Thanks Jim.  I'm a bit rusty when it comes to transformers, not having
worked with them for quite some time.

Jack

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, October 02, 2004 3:37 PM
Subject: Re: current output of 15 Kv, 30 mA neon xformer HALVED?


 > Original poster: Dsurfr-at-aol-dot-com
 >
 > Jack,  you would have 7.5Kv at 30mA off each leg of a 15Kv 30mA neon
xfrmr.
 > If you had 2 xfrmrs. you could parallel the output of one leg off of each
 > (in phase with each other) to get 7.5Kv at 60mA. You can't parallel the
two
 > legs off a single xfrmr. since they are 180 degrees out of phase.
 > Jim
 >
 >