Re[2]: current output of 15 Kv, 30 mA neon xformer HALVED?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mike Poulton" <mpoulton-at-mtptech-dot-com> 

Tesla list Wrote:
 > Original poster: Dsurfr-at-aol-dot-com

 > Jack,  you would have 7.5Kv at 30mA off each leg of a 15Kv 30mA neon xfrmr.
 > If you had 2 xfrmrs. you could parallel the output of one leg off of each
 > (in phase with each other) to get 7.5Kv at 60mA. You can't parallel the two
 > legs off a single xfrmr. since they are 180 degrees out of phase.

But, you can rectify them using a pair of diodes and get 60mA DC
output.

-------------------------------------------------
Mike Poulton
MTP Technologies
mpoulton-at-mtptech-dot-com
KC0LLX (70cm AM ATV, 33cm/12cm FM ATV, Omaha, NE)