[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Rotary Spark Gap Design
- To: tesla@xxxxxxxxxx
- Subject: Re: Rotary Spark Gap Design
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 26 Nov 2004 12:31:57 -0700
- Delivered-to: teslarchive@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Fri, 26 Nov 2004 12:35:11 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <FrNHr.A.kJ.kV4pBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Antonio Carlos M. de Queiroz" <acmdq@xxxxxxxxxx>
Tesla list wrote:
>
> Original poster: "Rajesh Seenivasan" <rajeshkvs@xxxxxxxxxxx>
> I'm planning to build a rotary spark gap:
> 8 spinning electrodes mounted on a wooden disc,
> 2 stationary electrodes,
> brass bolts used as electrodes.
The wood will burn almost immediately. use something that is a
better insulator.
Antonio Carlos M. de Queiroz