[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Secondary winding direction
- To: tesla@xxxxxxxxxx
- Subject: Secondary winding direction
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 25 Nov 2004 19:17:54 -0700
- Delivered-to: teslarchive@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 25 Nov 2004 19:19:39 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <X6lSzC.A.6oH.vKppBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: JBarrett@xxxxxxxxxxxxxxxx
HI,
I have a very basic Tesla Coil question. Does the primary and the secondary
need to be wrapped in the same direction? If so how is this determined?
A friend of mine and myself have been working on our first coil for about a
year now and we read somewhere the primary and the secondary needed to be
wound in the same direction.
Other than by calculation is there anyway to measure the frequency of the
secondary directly. I do not have an Oscilloscope.
Thanks Guys,
Jim B