Re: Sync Motors Herbach-dot-com

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 




Just remember these are not hysteresis sync type motors.  They sync, but not
always in the same position every time you turn them on.  Sometimes you have
to flick the power switch on and off a few times to get them to sync at the
peak as your RSG electrodes line up.

Dr. Resonance

 >
 > I got my sync motor from Herbach-dot-com today and it is really nice...
 > almost as big around as a quart of oil ( for those old enuf to remember
the
 > quart of oil in the papercan)  and about 3/4 as tall    ( 3 3/4 dia X 3
1/2
 > tall not counting shaft)
 >
 > runs a dead solid 1800 rpm    for an amazing 8.00$
 >
 > makes a wonderful Sync Gap for NST application in the helicopter or prop
 > style rotor.
 >
 > after I get the additional parts produced ( mount rotor hub etc) I will
try
 > to get a few pix up ...   along with the strobe stuff too...  sorry I
 > lagged an that part   been busy...
 >
 > Scot D
 >
 >
 >
 >
 >
 >