Re: Copper toroid

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

I don't know what the discussion is about,  But I made a copper toroid,
www.hot-streamer-dot-com/electrontube/temp/coppertoroid
www.hot-streamer-dot-com/electrontube/temp/coppertoroidsm

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, May 14, 2004 5:03 PM
Subject: Re: Copper toroid


 > Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
 >
 > I've seen steel wool to cause plastic to rust. A simple wipe down may do
it,
 > but will probaly inadvertently deposit body oils on it causing rather
quick
 > corrosion to the copper.
 >
 > ---Eric
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Friday, May 14, 2004 1:38 PM
 > Subject: Re: Copper toroid
 >
 >
 >  > Original poster: "Richard Modistach" <hambone-at-dodo-dot-com.au>
 >  >
 >  >
 >  > <<i've been a plumber for twenty five years and i do not care what you
do
 > to
 >  >  > copper it will not rust >>
 >msnip...