[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: nst's

To: tesla-at-pupman-dot-com
Subject: Re: nst's
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 12 May 2004 21:56:47 -0600
Resent-Date: Wed, 12 May 2004 22:00:28 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <biqi2.A.GlC.PLvoAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

In general, I don't think you want to wire the output of NSTs in series as
is done with MOTs.  NST can't  take the overvoltage.  NOW with 6KV NSTs,
others might comment on the insulation margin and if 2 wired in series will
work.

Gerry R

 > Original poster: Jimbo07031982-at-aol-dot-com
 >
 > Can anyone tell me how to connect two 6kv nst's together to get 12kv and
 > then a way to put in a 3rd one I have 3 they are all 6kv/30ma and I would
 > like to wire all of them together to get 18kv total out of them thanx.
 >
 >

Prev by Date: Re: G10 rotor thickness
Next by Date: Re: higher current ammeter sources
Prev by thread: Re: nst's
Next by thread: Re: nst's
Index(es):
- Date
- Thread