[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Coil Form needed

To: tesla-at-pupman-dot-com
Subject: Re: Coil Form needed
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 12 May 2004 16:06:32 -0600
Resent-Date: Wed, 12 May 2004 16:10:20 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <sizpEB.A.ZwC.IDqoAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Eastern Voltage Research Corporation" <dhmccauley-at-easternvoltageresearch-dot-com> 


Sonotube cardboard forms work well.  (Can get variety of diameters from
building suppliers, home depot, etc...)  I've seen as large as 24" in
diameter.
Dan


Dan


 > I am looking for a coil form 12" or greater diameter. The length should be
 > about 4 times the diameter. Also I am planning on using a 40kV .5uF
 > capacitor for the tank circuit. I have a 25kVA pig to drive it. Has anyone
 > on the list ever used that much capacitance in their tank circuit ?
 >
 >
 >
 > Paul S. Marshall
 >
 >
 >
 >
 >

Prev by Date: Re: SSTC hits 66"
Next by Date: nst's
Prev by thread: Re: Coil Form needed
Next by thread: Re: Coil Form needed
Index(es):
- Date
- Thread