[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Another SRSG phase adjuster question

Original poster: FutureT-at-aol-dot-com 

In a message dated 2/27/04 1:02:04 AM Eastern Standard Time, 
tesla-at-pupman-dot-com writes:

Steve,

Yes, 45 degrees mechanical is actually 90 degrees electrical
for 1800 rpm.  So all is well.

JOhn



>Hi coilers,
>
>I just got done building john's srsg phase adjuster.
>I am getting a 6 volt resonate voltage rise across the
>motor with the variac set at half. Anywhere else the voltage
>is lower but not lower than the line voltage.The problem is I am
>only getting about 45 degrees adjustment on my rotor.
>Is this because I am using a 1800 rpm motor?
>
>Steve Vance
>