[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Another SRSG phase adjuster question

To: tesla-at-pupman-dot-com
Subject: Another SRSG phase adjuster question
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 26 Feb 2004 22:54:24 -0700
Resent-Date: Thu, 26 Feb 2004 22:57:47 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <kr-mJ.A.3rF.WxtPAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "steve" <steve_vance-at-cablelynx-dot-com> 

Hi coilers,

I just got done building john's srsg phase adjuster.
I am getting a 6 volt resonate voltage rise across the
motor with the variac set at half. Anywhere else the voltage
is lower but not lower than the line voltage.The problem is I am
only getting about 45 degrees adjustment on my rotor.
Is this because I am using a 1800 rpm motor?

Steve Vance

Prev by Date: RE: MMC or Maxwell? Which is better? -- MMC tends to be better for the amateur.
Next by Date: Re: MMC or Maxwell? Which is better?
Prev by thread: RE: MMC or Maxwell? Which is better? -- MMC tends to be better for the amateur.
Next by thread: Re: Another SRSG phase adjuster question
Index(es):
- Date
- Thread