Re: Pig setup help.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 



We used to arrange a strike rail in a 350 degree circle.  We don't anymore.

We use four small 1/2"dia brass balls supported on short delrin rods such
that each ball is spaced 90 degrees and rises approx 1 1/2 inches above the
pri.  Each ball is grounded with a 6-32 fastener that runs all through the
delrin rod.

Any strikes seem to "find" one of the 3 balls and the strikes don't bother
the sec coil itself.

Dr. Resonance

 >
 > Just a little bit off subject;  if the center of the primary is grounded
 > (RF) as described in this thread, is a "Strike Rail" really needed?
 >
 > Randy
 >