Pig setup help.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "steve" <steve_vance-at-cablelynx-dot-com> 

I have a question for the list. I have a 10 kva pig I'm running
at 5 kva to power my coil my 6.5 inch coil. I was reading the archives
and came across a post about running one of the hv bushings and
the can to earth ground. Can't find enough information to convince me
that I fully understand how to do this safely. Someone correct me if I'm wrong
on this.... I run one of the hv leads to the can, ground the can to earth, run
the other hv lead to one side of the tank circuit, and the other side of 
the tank
goes to the rf ground? Or does it need it's own ground rod?

Thanks for any help.

Steve Vance