Re: Tungsten rod

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com> 

I'll second that.  The fiberglass reinforced ones work well, the emory ones,
not as well.  Do it outside if it is the thoriated rod.

David E Weiss

 > Original poster: robert heidlebaugh <rheidlebaugh-at-desertgate-dot-com>
 >
 > A dremmel cut off wheel workes well
 >     Robert   H
 > --
 >  > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >  >
 >  > I'm about ready to cut my 1/8 inch tungsten rod was wondering if there
is a
 >  > preferred method to cutting it (such as scribe and snap like a piece of
 >  > glass). What does it take to cut or scribe?
 >  >
 >  > Gerry R