[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten rod

Original poster: "Hydrogen18" <hydrogen18-at-bellsouth-dot-net> 

I've read before that a knick and snap method works well. I suppose you
would just tap it with a knife blade to create a weak point then stress it
to cause it to snap there.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, June 27, 2004 7:25 AM
Subject: Tungsten rod

 > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 > I'm about ready to cut my 1/8 inch tungsten rod was wondering if there is
 > preferred method to cutting it (such as scribe and snap like a piece of
 > glass). What does it take to cut or scribe?
 > Gerry R