[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten rod

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

File a V grove and snap it, then file the end flat.



At 06:20 PM 6/26/2004, you wrote:
>I'm about ready to cut my 1/8 inch tungsten rod was wondering if there is 
>a preferred method to cutting it (such as scribe and snap like a piece of 
>glass). What does it take to cut or scribe?
>Gerry R