Re: KF-film punture values

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "john cooper" <tesla-at-tesla-coil-dot-com> 

KF Polymer Film has a dielectric strength of 10kV per mm, and a dielectric 
constant of 9.8 at 60hZ.  Here's a link to a data sheet on this material in 
roll form for capacitor construction:
http://www.surplussales-dot-com/rf/rfteflon-mylar_sht.html
John


---------- Original Message ----------------------------------
From: "Tesla list" <tesla-at-pupman-dot-com>
Date:  Mon, 07 Jun 2004 18:30:42 -0600

 >Original poster: Rod and Pattu <rstapivic-at-cfl.rr-dot-com>
 >
 >I would like to attempt to build my own pulse discharge cap for tesla use
 >and I was wondering what the puncture voltage  is  for 25 micron
 >KF-film,  I've approximatly 2.5km of the stuff about 173 mm wide
 >thnx
 >rod and patti
 >
 >honey why are the lights dim
 >
 >
 >
 >