Re: High Voltage Output

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Ah! Thankyou Malcolm.  That's what I was missing.

Gerry R.

 > Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz>
 >
 > On 2 Jun 2004, at 23:33, Tesla list wrote:
 >
 >  > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >  >
 >  >
 >  > Hi Antonio,
 >  >
 >  > Would this be the sqrt of the turns ratio??
 >
 > No. It is the turns ratio as L is dependent on turns squared (e.g.
 > Wheeler's inductance formula has N^2 in the numerator).
 >
 > Malcolm
 >
 >  > Gerry R
 >  >
 >  >
 >  >  > Original poster: "Antonio Carlos M. de Queiroz" <acmdq-at-uol-dot-com.br>
 >  >  > > Curiously, as both tanks are tuned to the same frequency, and so
 >  >  > L1*C1=L2*C2, the gain is also equal to sqrt(L2/L1). If both coils >
 >  >  could be wound with the same geometry, this would be precisely the >
 >  >  turns ratio between the coils. > > Antonio Carlos M. de Queiroz > >
 >  >
 >  >
 >  >
 >
 >