[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Water resistors electrodes

To: tesla-at-pupman-dot-com
Subject: Water resistors electrodes
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 02 Jun 2004 08:00:42 -0600
Resent-Date: Wed, 2 Jun 2004 08:04:35 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <c4lOpD.A.n1G.w5dvAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Marco.Denicolai-at-tellabs-dot-com 

Hi all,

This may be an old question but...

I want to make a water resistor using copper sulphate solution and
copper electrodes. In the range of 10 Mohms.
Will material from the copper anode be transferred to the cathode and
change the resistor characteristics?
Will I get some precipitate (Cu) with AC or not?
Is there a better material for the electrodes?

Best Regards

Prev by Date: RE: High Voltage Output
Next by Date: Re: Water resistors electrodes
Prev by thread: Solid State vs Spark Gap ad nauseum...
Next by thread: Re: Water resistors electrodes
Index(es):
- Date
- Thread