Re: Depotting electronic NSTs

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "mercurus2000" <mercurus2000-at-cox-dot-net> 

What's a cheap source for that?


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, July 15, 2004 9:39 PM
Subject: RE: Depotting electronic NSTs


 > Original poster: "Tom Luttrell PWRCOM" <tom-at-pwrcom-dot-com.au>
 >
 > Methylene chloride should do the trick.
 >
 >  > -----Original Message-----
 >  > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 >  > Sent: Friday, 16 July 2004 04:07
 >  > To: tesla-at-pupman-dot-com
 >  > Subject: Depotting electronic NSTs
 >  >
 >  > Original poster: "mercurus2000" <mercurus2000-at-cox-dot-net>
 >  >
 >  > Sorry that this is slightly off topic, but I was wondering
 >  > what type of
 >  > solvent would dissolve the high voltage potting in the
 >  > electronic NSTs?
 >  > I've tried soaking it in acetone, but it only melted the
 >  > plastic shell.
 >  > Thanks,
 >  >     Adam
 >  >
 >  >
 >  >
 >  >
 >
 >
 >