Re: help needed to build transformer

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "BART" <BAPLATING-at-TDS-dot-net> 

Hi all,

I have two transformers from an Ameritherm Induction heater, here are the
specs:
Made by Jackson Transformer C.O. model # D489D Ameritherm # 137-0115  Rev c.
These are water cooled and weigh 24 LBS each, 9KVA, 200-450 KHZ.
If interested E-mail me off list.
ba1electronics-at-tds-dot-net

---- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, July 01, 2004 6:17 PM
Subject: help needed to build transformer


 > Original poster: tamp elektronik <l_oksuz-at-yahoo-dot-com>
 >
 > Hi
 > I need help in building a transformer 1:10
 > I have a power supply frequency range 100kHz to 450kHz
 > and theoutput is 50 ohm to 600 ohm and the voltage
 > output is around 750 volt at 3000 watts.
 > I need to get 7500 volt output from this power supply
 > can any body help me to find the right materials for
 > the transformer or any transformer supplier for this
 > specifications
 > thanks
 > lutfi
 >
 >
 >
 >
 >