plastics (was tool question)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "teri mckenney" <mck-at-ezy-dot-net> 

Hello all,
Every once in a while I work with a Marine material called Starboard that
works nice for primary supports,ect. Its somewhat obscure (it comes in 60"by
90" sheets) but if anyone lives near a boat repair place they might be able
to check and see if they have any leftover scraps.The stuff  planes,drills
,and cuts very nice.
http://www.kingstarboard-dot-com/newmain.htm
Bill Mck.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, June 28, 2004 3:00 PM
Subject: Re: Tool Question


 > Original poster: "john cooper" <tesla-at-tesla-coil-dot-com>
 >
 > Here's a phone number for Paragon Plastics, my primary source for these
 > types of materials, they'll be glad to elaborate and explain, they also
 > have data sheets:
 > 714-835-8181  pst
 > John
 >
 >
 > ---------- Original Message ----------------------------------
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date:  Sun, 27 Jun 2004 21:48:49 -0600
 >
 >  >Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >  >
 >  >I guessing it stands for Ultra High Molecular Weight.
 >  >
 >  >Gerry R
 >  >