static gap were run in series with a rotary gap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Luke" <Bluu-at-cox-dot-net> 

Has any one got input on this?
I was wondering if a short static gap were run in series with a rotary gap 
would it help timing?
That's not exactly what I mean let me explain.

As the rotary brings the electrode near each other they might let an arc go 
a little before they are in line because of the high voltage present might 
jump the arc.  Because the air in the area is moving this distance might be 
somewhat erratic and thus cause the gap to fire sooner or later.

If a small static gap were ran in series the distance of the total of the 
gaps would be a little larger.  This might reduce the arcs from jumping to 
the electrodes in the rotary gap before the electrodes are in line.  And 
the electrodes in the rotary could still be kept very close to allow for a 
more precise timing.

Any one ever thought about that?
If so give me your thoughts please.

Luke Galyan
Bluu-at-cox-dot-net