[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

coil design help

To: tesla-at-pupman-dot-com
Subject: coil design help
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 15 Jan 2004 08:12:14 -0700
Resent-Date: Thu, 15 Jan 2004 08:18:06 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <cAUCWD.A.thC.m8qBAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "steve" <steve_vance-at-cablelynx-dot-com> 

I have a question about designing a coil. I am planning on winding a 6" 
coil to replace my 4.5"
I am going to be running about 5KVA (14400V  350ma)
The question I have is: I am going to be using a ARSG at around 480bps. Do 
I design the coil to match
the actual capacitor I am going to use (.024uf) or the LTR cap size for a 
static gap(.097uf)?

Thanks for any help
Steve Vance

Prev by Date: RE: Secondary size
Next by Date: Re: MMC Residual charge
Prev by thread: Re: Calculating and Measuring Resonant Frequency / Inductance of Secondary Coil (magnifier)
Next by thread: Re: coil design help
Index(es):
- Date
- Thread