Re: "Green Monster" Magnifier completed

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Finn Hammer <f-h-at-c.dk> 

Daniel,

Goodlooking coil, I notice the spacing method you use on the primary coil. 
A quick and easy method.
You give the specs on all the other parts, excluding the master oscillator 
that you have shown.
Diametres, lengths and turns, perhaps even inductance, would complete your 
post.

Cheers, Finn Hammer

Tesla list wrote:
>Original poster: "Mccauley, Daniel H" <daniel.h.mccauley-at-lmco-dot-com>
>My "Green Monster" magnifier is finally completed.  Just received the
>nice custom built toroid from D&M High Voltage
>yesterday, so that completes it.  The completed tesla magnifier will
>have the following specifications:
>(also, i think someone else may have already used the term "Green
>Monster."  If thats the case, let me know and I'll
>change the name)
>Here is a picture of the "Green Monster."
>http://users.snip-dot-net/~liche/magnifier01.jpg
>
>HV Transformer
>(2) 14.4kV / 1.5kVA PTs paralleled and ballasted for 7kW output power
>Primary Capacitor:
>(2) 0.03uF capacitors in series (equi-drive)
>Primary Gap:
>10", 12 electrode ARSG in conjuction with air-blown series multiple
>spark gap
>Resonator Coil Dimensions:
>4" x 15" length
>Topload
>(1) 5" x 20" toroid
>(1) 7" x 34" toroid
>Dan
>