[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Wind vs Spark Length.



Original poster: dhmccauley-at-spacecatlighting-dot-com 

Yes, wind can really affect your coil's performance.
I learned this firsthand during a demonstration at Richard Hull's this year
with my PlasmaSonic Stereo SSTC system.
There was only the slightest of breeze outside, but when I was running the
coils, the audio was severely degraded and sounded
absolutely horrible.  I played with it for awhile and then realized this
slight breeze (which you could barely perceive) was moving the output
discharge
just enough to distort the audio reproduction.  I later moved the coils
inside, and it worked perfectly.

Also, with my other coils, if it is windy outside, the arcs can be limited
and extinquished by the wind as well before they have a chance to meet
maximize distance.

Dan


 > Hello,
 >
 > I have just finished running my 10" coil outside, however this evening it
 > was rather windy, and noticed that the maximum spark distance to a
grounded
 > rod was greatly reduced, from about 9-10ft on previous runs to about 7-8ft
 > tonight. Does this sound reasonable?
 >
 > I also tried de-tuning the primary out-wards by 1/3 of a turn; it seemed
to
 > make the power-arc much more intense.  I don't know what effect this would
 > have on the spark length as it was just too windy. Has anyone had similar
 > experiences? I did manage to get a few good time-lapse photos of the coil
 > running at about 10kW they are under the sparks menu at
 > http://tesla.reidconsulting-dot-com.au however they were taken before the
 > primary was "de-tuned" to account for streamer loading. Any comments /
 > suggestions would be greatly appreciated.  I am aiming for around 12ft.
:-)
 >
 >
 > Regards
 >
 > Peter Reid.
 >
 >
 >
 >
 >
 >