Re: Herrick's Transformerless Tesla Coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "K. C. Herrick" <kchdlh-at-juno-dot-com> 

As to the following, I just tried a scrap piece of 1/32" linen-phenolic
(in my HP 1120C) & it worked (& the printer still worked, afterward!).
The technique might be useful to others.

KCH

From: K. C. Herrick <kchdlh-at-juno-dot-com>
To: tesla-at-pupman-dot-com
Cc: dave-at-leddon-dot-com
Date: Sun, 22 Feb 2004 09:49:27 -0800
Subject: Re: Herrick's Transformerless Tesla Coil

[snipped]

I also note in passing that I'm going to try a trick to help me lay down
all those little "tiles" onto the stator substrate: I'll try using a
1/32" substrate (later to be glued to a thicker one), first passing that
thin substrate thru my ink-jet printer, which has a straight-thru path,
so as to print guide-lines onto it from my CAD drawing.

[snipped]