Re: Crazy Flyback!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


They had automated machines that used "cam followers" to do it.  Sort of
automation prior to microprocessors.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, February 19, 2004 4:29 PM
Subject: RE: Crazy Flyback!


 > Original poster: "Daniel Kline" <daniel_kline-at-med.unc.edu>
 >
 >
 >
 >  > -----Original Message-----
 >  > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 >  > Sent: Thursday, February 19, 2004 2:20 PM
 >  > To: tesla-at-pupman-dot-com
 >  > Subject: Re: Crazy Flyback!
 >  >
 >  >
 >  > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >  >
 >  >
 >  > Yes you could --- if you have a $20,000 computerized coil
 >  > winder at your
 >  > disposal.  Sec is  4,200 turns of #42 AWG and it's impossible
 >  > to wind it by
 >  > hand or even with a lathe.  Requires an automated machine.
 >  >
 >  > Dr. Resonance
 >
 > Wow! I wonder what they used back in the 50's and 60's!
 > Dan K.
 >
 >
 >