Re: Power level Vs Coil hieght

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com> 

Hi Luke,

I run 12/120 on my 6" with 620T of #20.  Will be building a 1000-1200T coil
of #26 as soon as my cousin (plumber) drops off the pipe.

David E Weiss

 > Original poster: "Luke" <Bluu-at-cox-dot-net>
 >
 > I have my secondary wound and it is 6.315" dia and 27" tall with 1500
turns
 > of 26 AWG wire.
 > I was going to use 15KV 60ma NST.  But the evil side kicked in and said
 > MORE!!!!!!!!
 > What are some opinions on how bad it would push this coil if I bumped up
to
 > 15KV 90ma?
 >
 > Seems to me it is boarder line.  The sensible side says don't push it and
 > it will last longer.
 > The other side of me says go ahead bump it up.
 >
 > Thoughts?
 >
 > Luke Galyan
 > Bluu-at-cox-dot-net
 >
 >
 >
 >