[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ONEAC Power Filters and Corcoms...



Original poster: "Shaun Epp" <scepp-at-mts-dot-net> 

Hello Brett,

I salvaged two identical units from some older sterylizer equipment, I
parallel connected them.  I have seen them on ebay many times.  Try there.

Shaun


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, January 30, 2004 9:02 AM
Subject: ONEAC Power Filters and Corcoms...


 > Original poster: Brett Miller <brmtesla2-at-yahoo-dot-com>
 >
 >
 > --- Tesla list <tesla-at-pupman-dot-com> wrote:
 >  > Original poster: "Shaun Epp" <scepp-at-mts-dot-net>
 >  >
 >  > That's a good power filter.  They are worth alot of
 >  > money.  I have a 30 amp
 >  > version sitting behind my A/V rack powering my home
 >  > stereo.  I've often
 >  > wondered how well it would work to filter noise from
 >  > a tesla coil, then I
 >  > remember how much it weighs (78 pounds),  ooofff!
 >  > These ONEAC
 >  > transformers are high quality!  They re-establish a
 >  > low impedance between
 >  > neutral and ground though the secondary of the
 >  > isolation transformer.  There
 >  > is some surge suppression components in them too.
 >  > Look em up on the net.
 >  > I'm going to stick with the Corcom line filters for
 >
 > Thanks for the info Shaun.  Yeah, I've noticed fellow
 > coilers using Corcoms for years...where do you get
 > yours?  Do you purchase them new, or from somewhere
 > like ebay?
 >
 > -Brett
 >
 >
 >  > my tesla coil.
 >  >
 >  > Shaun
 >