[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Terry's DRSSTC - Frequency/Pulse Width Controller
- To: tesla@xxxxxxxxxx
- Subject: Re: Terry's DRSSTC - Frequency/Pulse Width Controller
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 16 Dec 2004 07:59:45 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 16 Dec 2004 08:05:41 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <9N549D.A.j_.FRawBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Stork <rwall3264@xxxxxxxxxxxxx>
Terry,
The first IC function generator that I built ~ 15 years ago used an
XR2206. More recent ones I built around the MAX 038. It's frequency
range is from 1Hz to over 20 Mhz by switching in different timing caps
for different frequency ranges. I use a 6 pole switch to switch the cap
ranges. I also use a coarse and a fine (multiturn) pot for tuning
frequency and pulse width. IC function generators are much more precise,
have many more features and are far easier to work with than multiple 555's.
http://www.web-ee.com/Schematics/Function%20Generator/function%20generator.htm
RWW