[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: DRSSTC Primary Circuit Feedback Control
- To: tesla@xxxxxxxxxx
- Subject: Re: DRSSTC Primary Circuit Feedback Control
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 06 Dec 2004 21:42:13 -0700
- Delivered-to: teslarchive@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 6 Dec 2004 21:44:23 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <dDWvc.A.g2H.kUTtBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Daniel McCauley" <dhmccauley@xxxxxxxxxxxxxxxxxxxxxxxxxx>
I have already run my coil back in early summer using the TO-247 type
40N60's with no problems.
Dan
> Hi Terry,
>
> The little IGBTs should be practical anyway. Based on some
> measurements taken on my DRSSTC, I'm convinced that a half bridge of
> little TO-247 IGBTs could get me to 5'.
>
> You have to be a little careful with primary feedback, because if it
> isn't tuned, the secondary won't be sucking much out, and it will
> build up more than normal