Re: splicing magnet wire

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Hi Bart,

Interesting,  I would have thought the splice would want to be in the bottom
1/3 of the winding where the voltage is lower and corona is less of a
problem.  Please share your thinking here.

Gerry R.

 > Original poster: "BART" <BAPLATING-at-TDS-dot-net>
 >
 > Steve,
 > Iwould go for the top 1/3 of the winding.
 >
 > Bart A.
 >
 >
 >  > Original poster: "steve" <steve_vance-at-cablelynx-dot-com>
 >  >
  If I go this route I will have
 >  > one splice at about 1/3 the winding length. Would it be better to place
 > the
 >  > splice near the bottom or the top of the coil?
 >  >
 >  > Thanks for any input,
 >  >
 >  > Steve Vance
 >  >
 >  >
 >  >
 >
 >