[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Flyback Driver PCBs
Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
You could always buy one of my Flyback Driver PCBs... The title of this
thread ;-)
Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, April 17, 2004 8:39 PM
Subject: Re: Flyback Driver PCBs
> Original poster: "Arpit Thomas" <arpit-at-inzo-dot-org>
>
> Hi kreso. I took a 145 watt psu apart and without my solder wick i couldnt
> desolder teh transformer so i soldered wires onto 2 of the 4 lines into
the
> transformer. I then took a monitor flyback and found some input pins with
> a resistance between them of 1.5 ohms and connected the wires to them. I
> had a 150 mercury vapour light connected toa power board ( it was dark).
> WHen I plugged the psu into the power board the mercury vapour lamp turned
> off then restarted from the slowly getting brighter cycle. the psu made a
> quiet buzzing like they do when overloaded, and I got no sparks whatever.
> I'm giving up on your method, and going to try a halogen download smps. :)
>