[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: First light for my 3 inch coil!
Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
Well, this stinks. Now whenever I plug/unplug my 4 pack MOT it arcs between
the outer xformers(carbon tracks I'm betting). After all the time and
effort, to have it die in a single run makes me dissapointed. I guess my
coiling days are over.
---Eric
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, April 14, 2004 7:20 PM
Subject: First light for my 3 inch coil!
> Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
>
>
<http://www.hydrogen18-dot-com/projectlogs/hivolt/3inchtesla/>http://www.hydroge
n18-dot-com/projectlogs/hivolt/3inchtesla/
>
> Woohoo! This was awesome! That setup was pretty hastily done but I was
> happy. It was really fun messing around with stuff to get the best arc.
> Best of all, the noise brought every dog in the neighborhood to a howl!
> Anyhow, I opened the gap too wide and the 4 pack MOT arced but I shut it
> down immediately and closed the gap, afterwards it worked again. My only
> concern is I would hear the hum from the pack occasionaly over the arc
like
> it was getting a dead short. I really need to make a better setup than
this
> though, it was the ultimate in horrible lashup. Also, my ground rod is
only
> a 6 inch piece of 1/2 copper pipe hammered into the ground, should I worry
> about improving this?
>
> A little bit of a side note, my 4 pack MOT caught on fire during the run.
> It was a faulty connection on my part, and no the rigors of tesla coil
> service causing it.
>
> ---Eric
>
>
>
>