Re: NEW Self-Resonant COMPLETE SSTC Boards - BULK ORDER

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 

Depends on a lot of things...
how thick is the copper?
Is it plated?
Do they provide test coupons?
How many holes? (of how many different sizes?)
Are the boards trimmed to exact size?
How many layers
Is there soldermask and/or silkscreen?
How fast do they deliver?
etc,etc,etc.

Especially when dealing in small quantities of small boards, comparing on
square inches probably isn't a very good metric. Setup charges (even if
embedded in the "per board" cost) are probably the dominant factor.


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, April 11, 2004 10:57 PM
Subject: Re: NEW Self-Resonant COMPLETE SSTC Boards - BULK ORDER


 > Original poster: "Eastern Voltage Research Corporation"
<dhmccauley-at-easternvoltageresearch-dot-com>
 >
 > $25.00 for a 2x3 board is NOT ridiculously cheap.
 >
 > If I can get boards in quantity of 10 at a 7x10 size (70 square inches)
for
 > about $45.00 each and your boards which were 2x3 size (6 square inches)
for
 > $25.00 each?  Either my math skills are really messed up or something
 > doesn't sound quite right here.
 >
 >
 >  > Not at the new PCB company I discovered... You can get ridiculously
cheap
 >  > boards there.
 >  >
 >  > Regards - Jim Mitchell
 >
 >