Re: Maxwell AC vs. DC ratings

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Virtualgod" <mike.marcum-at-zoomtown-dot-com> 

Never tried it but I'm guessing mineral oil is flammable when sprayed in an
open flame/direct ignition source with O2 available.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, April 03, 2004 8:05 PM
Subject: Re: Maxwell AC vs. DC ratings


 > Original poster: "Christoph Bohr" <cb-at-luebke-lands.de>
 >
 > Hello all.
 >
 > This is only a little bit related to the topic, but anyway:
 >
 > Is the impregnant in the 37667 caps flammable?
 > I wanted to mount the caps right above th RSG but now I
 > fear this might be a serious fire hazard in case the caps spill oil mist
 > during a cap failure.
 > I have run these caps with a 6MOT ( guestimated 12KV ) without failure
 > but I had only short runs ( < 30 sec ) with this setup.
 >
 > regards
 >
 > Christoph Bohr
 >
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Saturday, April 03, 2004 11:38 PM
 > Subject: Re: Maxwell AC vs. DC ratings
 >
 >
 >  > Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>
 >  >
 >  > Hi Bert,
msnip.........