Re: PlasmaSonic SSTC II Completed Design and Updated Schematics

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Zagarus Rashkae <arbitrarily_random-at-yahoo-dot-com> 

Hi Dan,

Sign me up for one too! Thanks!

Chris

--- Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "Dr. Resonance"
 > <resonance-at-jvlnet-dot-com>
 >
 >
 > Dan --- if it will help put me on the list for one.
 > Please advise again of
 > the price w/shipping.
 >
 > Dr. Resonance
 >
 >  > I've completed my PlasmaSonic II Design and have
 > posted the schematics and
 >  > parts list.  I also built up a prototype VU Meter
 > and the test was
 >  > successful.  Should be a great improvement for
 > the SSTC.
 >  >
 >  > Full-Bridge Power Supply Schematic
 >  >
 >
http://www.spacecatlighting-dot-com/datasheets/sc2038schematic_sheet1.pdf
 >  >
 >  > SwitchMode Controller (SMPS) Schematic
 >  >
 >
http://www.spacecatlighting-dot-com/datasheets/sc2038schematic_sheet2.pdf
 >  >
 >  > Low Voltage Power Supply and VU Meter Schematic
 >  >
 >
http://www.spacecatlighting-dot-com/datasheets/sc2038schematic_sheet3.pdf
 >  >
 >  > PlasmaSonic II Parts List
 >  >
 >
http://www.spacecatlighting-dot-com/datasheets/sc2038_partslist.pdf
 >  >
 >  >
 >  > If you have ordered yet, please do so as soon as
 > possible.  I'm looking to
 >  > place the order next week and need a minimum of
 > 20 boards to do so.
 >  > If you already have an original PlasmaSonic
 > Board, I would urge you to get
 > a
 >  > second one.  Running the PlasmaSonic system in
 > stereo is something that
 >  > has to be heard to be appreciated.  Its
 > absolutely stunning.  This will be
 >  > the last PlasmaSonic board design, so after these
 > boards are gone, thats
 > it.
 >  > Be
 >  > sure to get one while you can!!!
 >  >
 >  > Dan
 >  > dhmccauley-at-spacecatlighting-dot-com
 >  >
 >  >
 >  >
 >