Re: JAVATC v10

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi Bart,

I just wanted to say THANKS!! for working so hard on this wonderful program!!

I incorporates all the latest theory and everything into one program!!

By far, the most powerful and comprehensive Tesla coiling program out there 
now!!

Cheers,

         Terry


At 09:17 PM 9/19/2003 -0700, you wrote:
>Hi ALL -
>
>JAVATC version 10 has been in testing for a couple months now. I think 
>it's finally ready for all List members to use it as they see fit. It is a 
>complete re-write. I wanted to take advantage of Paul Nicholson's GEOTC 
>(the core code which FANTC uses) and pull GEOTC's accuracy into JAVATC. 
>This has been accomplished, but was not an easy task. I'd like to say  a 
>special thank you to John Couture and Gerry Reynolds for their very 
>detailed feedback over the past couple months. I'd also like to thank 
>everyone else who tested the program.
>
>JAVATC will now account for walls, ceiling, groundplane, multiple topload 
>objects, and inductive and capacitive variations due to non-linear current 
>distribution. JAVATC can now run helical, cone, inv. cone, and flat 
>geometry for

..........