Re: Filament help!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Gerwazy WP <hardtmutha1-at-wp.pl> 

At 03:03 2003-10-26, you wrote:
>Original poster: "Jim Mitchell" <Wrenchead-at-starband-dot-net>
>I'm using a 4-125A in my VTTC, and I cant find a filament supply!  I was
>thinking of using a PC PSU but they have too many wires and I don't know
>which ones to cross for power on, and which to load to keep regulation
>proper.  The 4-125A needs 5v at 6.5A for the filament.  Also, any idea if
>thise tube is better than the 813? I have both and am wondering which I
>should use.
>
Hi,

you have to connect in ATX PSU green cable in this big connector to some 
black one and the PSU will start, but you must connect some load to its 
out, because it will turn off after while or even wont start.

cheers,
hardtmuth