[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Improving my poorly designed coil

To: tesla-at-pupman-dot-com
Subject: Re: Improving my poorly designed coil
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 13 Oct 2003 23:37:11 -0600
Resent-Date: Mon, 13 Oct 2003 23:43:59 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <SiwSPD.A.FWC.iy4i_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 


Hi Chris,

You may want to go to a flat primary so you can lower the strike rail, or
maybe some good plastic insulator between the secondary and the strike rail
as a quick fix.

Gerry R
Ft Collins, CO


 > Original poster: "Chris the great" <downnessisgoingup-at-hotmail-dot-com>
 >
 > me a max spark of 8 inches :(.  Also, I am getting corona forming from the
 > center of my secondary to the strike rail.
 >

Prev by Date: Re: Fast quenching spark gaps - External Series Gap on Rotary Gap
Next by Date: Re: eddy current with secondary coil
Prev by thread: Re: Improving my poorly designed coil
Next by thread: RE: Improving my poorly designed coil
Index(es):
- Date
- Thread